• EXOR eX707FB for food & beverage and pharmaceutical sectors
• Made from stainless steel bezel design
• 7" TFT 16:9 display
• 800x480 WVGA pixel resolution
• 64K colors 500cd/m2
• IP69K
• Projected capacitive multitouch touchscreen
• 1GB RAM /4GB Flash
• 3 ethernet ports with switch function
• Cloud
• 2 USB host ports
• SD card slot
• Multistandard serial port
• Connection to bus systems using optional plug-in modules
• Powerful and intuitive programming with JMobile software
• Available in front colors blue, CE, culus, Linus RT/Jmobile RT

The EX707FB is a unique 7” HMI panel for the harshest environment imaginable.

The panel is made of acid-resistant stainless steel and with a foil coating that protects the HMI panel glass touch against breakage and splinters. Therefore, the EX707FB is approved for use on machines for the food industry and

Pharma world.

The EX707FB is washable with high-pressure hot water up to 90°C. Possible due to the fact that EX707FB has a degree of tightness of IP69K.

EX707FB has the known interface options such as 3 x ethernet ports, 1 x multiserial port, 2 x USB ports and 2 expansion spaces on the back, where I/O cards, extra communication ports etc. can be mounted.

EX707FB is prepared to include CODESYS PLC and at the same time be connected to CorvinaCloud CC1. With CC1 activated the machine will be online for Remote / Management - not only the EX707FB HMI panel but with all equipment with TCP/IP ports on it.

The EX707FB is programmed by the JMobile software which can be downloaded from Smartdk.com.